I have an odd situation. Last time I used the BRP it called for a firmware upgrade which I did but did not use it afterward. Yesterday I tried to play a Blu Ray and the TV switched to the right input channel but the screen remained blank. I had lots of audio but nothing on the screen. Remote buttons for menus or Home screen did nothing. I replaced the HDMI between the BRP and AVR, no change. I also replaced the Remote batteries.
I bought an inexpensive LG (no wifi) and hooked it up, no video, audio worked.
I have been through every setting I can find, no difference.
The one thing I haven't done is replace the ARC HDMI between the AVR and the TV. The TV itself is fine and audio from AVR works fine.
TV is on HDMI one and BDP is on HDMI three (ARC). I ordered a Mono Price HDMI, arriving Sunday. Walmart only local source is loaded with poor choice cables.
Any thoughts??
EDIT: I also reset the BRP and pulled the plug on the AVR for 5 minutes. I could not find an alternative way to reset it.
Fractal Design R5 | Asus Z170 Pro | Intel i5 6600k | 16 GB G.Skill Ripjaws DDR4 2133 | Seasonic 650w PSU | eVGA GTX 550 TI | Samsung 960 M2 500 GB | Samsung 850 EVO 500 GB | ASUS Burner | Windows 7 64-bit