Date: 30 July 21, 05:25 AM
Do you already have an account?

Forgot your password?


 a switch is overloaded in the breaker box



chopin1397


Poaster
Posts 311
Report to moderator

Offline Offline

  • **

  • 311
    Posts

I’m in a home with 2 upstairs bathrooms. There are small floor heaters in both. If they are both on they trip the switch in the breaker box. Lights in both are no problem. It’s the wall receptacles that are apparently the problem. Seems to me the easy solution is to put a new switch in the breaker box (there are 8 available slots), then simply split off some of the wiring to the new switch to take the load off the existing switch. Would this work?

Bill


Universal Moderator
Posts 6831
Report to moderator

Offline Offline

  • *****

  • 6831
    Posts

JA is right.  Unless you are ABSOLUTELY qualified to do this kind of wiring, DON"T.  Hire an electrician.

Bill
Fractal Design R5 | Asus  Z170 Pro | Intel i5 6600k | 16 GB G.Skill Ripjaws  DDR4 2133 | Seasonic 650w PSU | eVGA GTX 550 TI | Samsung 960 M2 500 GB | Samsung 850 EVO 500 GB | ASUS Burner | Windows 7 64-bit

chopin1397


Poaster
Posts 311
Report to moderator

Offline Offline

  • **

  • 311
    Posts

I definitely wouldn't just replace the breaker with a higher amperage. There are 8 free slots in the box. The switch that trips is no. 17 with a 15 amp rating. If there are 2 sets of wires going into 17 I don't think there is a risk if I split off one set of those wires to a new 15 amp switch in one of the free slots.

Bill


Universal Moderator
Posts 6831
Report to moderator

Offline Offline

  • *****

  • 6831
    Posts

If there are two sets of wires going into #17, it wasn't wired properly in the first place.  Chances are the second set were added by someone other than the original electrician.  But you're right, splitting one set to a new breaker would probably solve the problem.  Be sure to turn off power to the Breaker box before going any further.
Fractal Design R5 | Asus  Z170 Pro | Intel i5 6600k | 16 GB G.Skill Ripjaws  DDR4 2133 | Seasonic 650w PSU | eVGA GTX 550 TI | Samsung 960 M2 500 GB | Samsung 850 EVO 500 GB | ASUS Burner | Windows 7 64-bit

chopin1397


Poaster
Posts 311
Report to moderator

Offline Offline

  • **

  • 311
    Posts

I should have mentioned I haven't unscrewed the cover and looked behind the switch yet. So it might not be possible to fix it without new wiring which I would not attempt. I do not see a switch on the box that cuts off all electricity. Is that switch somewhere else?

Bill


Universal Moderator
Posts 6831
Report to moderator

Offline Offline

  • *****

  • 6831
    Posts

Generally there is(are) a main power breaker(s) inside the box, typically very near the top; could be two depending on the size of your service ( 110 vs 220 and the total number of number of circuits.)  I wouldn't be surprised if #17 has only one hot wire to the breaker and one ground (white) to the box lugs that is sometimes across the bottom or vertically between the 2 rows of breakers, also all inside, under the cover you haven't take off yet.  That would mean that more than one room is on a single circuit.
Fractal Design R5 | Asus  Z170 Pro | Intel i5 6600k | 16 GB G.Skill Ripjaws  DDR4 2133 | Seasonic 650w PSU | eVGA GTX 550 TI | Samsung 960 M2 500 GB | Samsung 850 EVO 500 GB | ASUS Burner | Windows 7 64-bit

chopin1397


Poaster
Posts 311
Report to moderator

Offline Offline

  • **

  • 311
    Posts

Thanks Bill and others for the input. It appears the Main Breaker is hidden until you unscrew the cover(?) It's not visible now. I may wait and try another floor heater to see if it trips the breaker too. I'm thinking now after all your input I will find only one set of wires on 17 anyway. Get back later.